LinkedIn YouTube Facebook Twitter RSS Reset

ATS Diesel releases the New LML Twin Fueler Kit

The LML Twin Fueler ATS Diesel releases the NEW LML Twin Fueler Kit

The factory CP4 is designed to be a high pressure pump to increase atomization of the fuel resulting in a better driving experience on the new LML platform. Unfortunately this set up lacks the volume when compared to the previously

used CP3 pump, resulting in a limited power band and short cap on power that this vehicle can be pushed to. ATS Diesel has designed this Twin Fueler kit to help you receive the best of both worlds with the fuel volume and pressure you need to maximize your driving experience whether it be daily driving, towing, drag racing, or sled pulling!

CP3 Control Box 

The ATS CP3 control box is designed for the LML will utilize the pulse signal from the factory CP4 and convert that over to work with the CP3. This will allow you to have a smooth rail pressure curve without the need of going into custom tuning tables to control a secondary pump.

Behind the Kit

The new stronger bracket assembly and idler pulley location offers even more belt wrap now at 66%. Additionally, the billet aluminum wheel, is sized proportionally to the factory CP4, allowing better equalization of the rails. Generally, this will not matter so much as the regulators will control the amount of fuel regardless, however, it is attention to detail such as this that sets the ATS kit apart from the others.

_________

Press Release Supplied By: ATS Diesel

Press Release Contact Email: newsletter@atsdiesel.com

Photo Credit To:

Website: www.atsdiesel.com

_________

News Compliments of  OnRoad Newswire    

Facebook 50         rss 50        email 50  Send In Your News!
 SUBSCRIBE to the Weekly Newsletter with Upcoming Events, Last Weeks Race Results, Last Weeks News + MORE!

No comments yet.

Leave a Comment