LinkedIn YouTube Facebook Twitter RSS Reset

K&N Intake for More Performance from 2012 & 2013 Ford Mustang Boss 302 5.0-Liter

black aluminum tube of performance air intake system

Black aluminum tube of performance air intake system 69-3534TTK with factory look & feel under the 2012 and 2013 Ford Mustang Boss 302 5.0L

The sight of an original 1969 or 1970 Ford Mustang Boss 302 is enough to make Mustang fans feel like a kid on Christmas morning. The Boss 302 moniker is synonymous with performance as the original car was developed to meet homologation rules for SCCA Trans-Am Series racing. With such a rich racing heritage attributed to the Boss 302 any idea of resurrecting the iconic nameplate left the modern Ford Mustang 5.0 with large shoes to fill. Fortunately for Boss 302 purists the 2012 and 2013 Ford Mustang Boss 302 5.0L did not disappoint.

 

 

Ford Mustang Boss 302 5.0L

The 2012 and 2013 Ford Mustang Boss 302 5.0L uses the same engine as the Mustang GT, however, extensive modifications were made bringing up the horsepower rating to 444 HP

The 2012 and 2013 Ford Mustang Boss 302 5.0L uses the same engine as the Mustang GT. However, extensive modifications were made to the late model air intake tract, including the manifold, cylinder heads, and camshafts. While the Mustang GT 5.0-liter engine is fast, the 2012 and 2013 Ford Mustang Boss 302 5.0-liter engine produced an additional 32 horsepower and is rated at 444 horsepower from the factory.

 

 

 

 

 

Boss 302 moniker

The Boss 302 moniker is synonymous with performance as the original 1969 Ford Mustang Boss 302 was developed to meet homologation rules for SCCA Trans-Am Series racing

K&N air intake designers knew there was room for more performance from the Boss 302. Owners seeking this extra boost in power can now install the 69-3534TTK performance air intake system. 69-3534TTK from K&N is precision-engineered to be a simple-to-install performance add-on. The backbone of this intake system is a free-flowing mandrel-bent aluminum intake tube which helps to minimize restriction, allowing your engine to breathe easier. A durable black powder coated finish is applied to the tube, providing a sleek appearance under the hood that will look great for years to come.

 

 

heat shield

The heat shield of 69-3534TTK helps direct air entering the factory fresh air scoop into the engine of 2012 and 2013 Ford Mustang Boss 302 5.0L models

K&N equips 69-3534TTK with the oversized chrome-top RF-1048 air filter, providing a large surface to help increase airflow while providing outstanding engine protection. The filter is made with K&N’s famous high-flow filter media so it’s a washable and reusable air filter which can go up to 100,000 miles between cleanings, depending on driving conditions. To top it all off, a heat shield shrouds the air filter under the hood, helping to direct air entering the factory fresh air scoop into the engine.

 

 

 

Ford Mustang

On the dyno, 69-3534TTK produced an estimated additional 17.02 HP at 6700 rpm and an impressive 10.18 lb-ft of torque at 3400 rpm on a stock 2012 Ford Mustang Boss 302 5.0L

All of the design features of the 69-3534TTK performance air intake system work in perfect harmony to deliver increased performance. On the dyno, 69-3534TTK produced an estimated additional 17.02 horsepower at 6700 rpm and an impressive 10.18 pound-feet of torque at 3400 rpm over the factory system when tested on an otherwise stock 2012 Ford Mustang Boss 302 5.0L.

The 69-3534TTK performance air intake system for the 2012 and 2013 Ford Mustang Boss 302 equipped with a 5.0L engine. With simple to follow instructions and no need to make any other modifications to the vehicle, you’ll be on the road in approximately 90 minutes with more horsepower under your right foot.

If all that weren’t enough, K&N backs the 69-3534TTK with the industry-leading K&N Million Mile Limited Warranty. If you’re looking to take your 2012 and 2013 Ford Mustang Boss 302 5.0L to the next level, look no further than the 69-3534TTK Typhoon air intake system.

To find additional K&N products for your 2012 and 2013 Ford Mustang Boss 302 visit K&N Mustang Boss 302 Air Intakes page on KNfilters.com.

 

_________

Press Release Supplied By: K&N

Press Release Contact Email: newsletter2@knfilters.com

Website: 

_________

News Compliments of  OnRoad Newswire    

Facebook 50         rss 50        email 50  Send In Your News!
 SUBSCRIBE to the Weekly Newsletter with Upcoming Events, Last Weeks Race Results, Last Weeks News + MORE!

No comments yet.

Leave a Comment